How to manually replace a corrupted system file with a known good copy of the file. After you determine which system file was corrupted and could not be repaired through the detail information in the Sfcdetails.txt file, find where the corrupted file located, and then manually replace the corrupted file with a known good copy of the file. DISM (Deployment Image Servicing and Management) is a tool that can fix corrupted system files quite instantly. You can use this tool through command prompt by following the given steps: First, run. Click the View tab, and then click Show hidden files, folders, and drives. Clear the Hide protected operating system files check box, click Yes to confirm, and then click OK. Locate the C: Users OldUsername folder, where C is the drive that Windows is installed on, and OldUsername is the name of the profile you want to copy files from. The Inbox Repair Tool may need to be run several times in order to fully repair your personal folder (.pst) file. The Inbox Repair Tool cannot repair every problem that is detected. In some cases, items may not be recovered if they were permanently deleted or corrupted beyond repair.
- Repair Corrupted Video Files
- Microsoft Downloads Fix Corrupted Files
- Software To Fix Corrupted Files
- Repair Corrupted Files Online
When a file or a folder is corrupted, you get a message saying that the file is corrupted and cannot be opened, cannot be read, or your computer asks if you would like it to recover the contents for you. This could happen to all kinds of files on the computer, even the system files. To fix the corrupted file, you can either use the built-in functions of your computer or a third-party tool. Here I will introduce 8 possible solutions.
Repair Corrupted Video Files
Ford 2015 tractor transmission repair manual. These methods are applicable to Windows XP, Windows 7, Windows 8, and Windows 10.
How to Fix Corrupted Files?
To save your time, I have sorted out all the solutions in the comparison chart below.
Supported File Types | Tech Knowledge Required |
|---|---|
Pretty Easy | Might have data loss |
All files | No |
Easy | Might have data loss |
System files | No |
Complicated | No |
All files | Yes |
Pretty Easy | File leak |
All files | No |
#Fix 1. Trust MS to Recover the File
This method is available to fix most Microsoft files corrupted problem. This is the easiest way but only works if you get a message like this:
Word/Excel/PowerPoint found unreadable content in [filename]. Do you want to recover the contents of this document? If you trust the source of this content, click Yes.
We found a problem with some content in [filename]. Do you want us to recover as much as we can? If you trust the source of this workbook, click Yes.
In this situation, just click 'Yes'. 90% of the time microsoft can recover the corrupted file and you will see it the same as you opened it last time.
#Fix 2. Restore the Corrupted File from Previous Versions
This method is also conditional. You have to had the previous versions feature turned on before. It will allow you to restore the file to the restore points. However, all the changes from that time will be gone. Damaged folders and hard drives can also be restored in the same way. To restore the file to previous versions,
Step 1.Right-click the corrupted file and choose Restore previous versions from the drop-down menu.
Step 2. Just select the version of the file you want to restore from the pop-up window. Either clicking Copy or Restore will work. I suggest you click on Copy and paste it somewhere else.
#Fix 3. Change the File Format
Sometimes the file shows corrupted because of a wrong file format. If you just get the file from your client or friend, it might be corrupted during the transfer due to compatibility issues. If the file has always been on your computer and it just gets corrupted for no reason, somehow the problem can also repair that. There is no risk to try.
Microsoft Downloads Fix Corrupted Files
Step 1.Make a copy of this corrupted file since changing the file format might cause damage to it.
Step 2. Change the file to a similar file format (eg. xlxs to xls) either by renaming the file or using an online file converter. If your file doesn't have a file format show after the file name, manually add the file extension (such as .xlsx) to it.
Step 3. See if the file can be opened properly.
#Fix 4. Perform a Check on the Driver with the Corrupted File
Windows itself offers the Error Check function. It will check the drive for file system errors. If the corrupted file is a system file, it can scan, find out, and fix the error. Here is how to perform a standard error check on the drive:
Step 1. Open the Computer and then right-click on the hard drive that has the corrupted files. Select Properties.
Step 2. On the Properties window, click Tools and then tap Check now under Error-checking.
Step 3. Select the 'Scan for and attempt recovery of bad sectors' and 'Automatically fix file system errors' checkboxes and then tap Start.
Step 4. If it is the system disk (normally C:) that contains the corrupted file, you have to schedule a disk check and restart your computer. The checking starts immediately when you restart the computer. After it is completed, the results will be displayed.
Step 5. After reviewing the scan result, tap Scan and repair drive. Select when you want the file system to be repaired and then wait for the final result.
#Fix 5. Run 'sfc/scannow' Command
This is also a solution to fix the system files corruption. The 'sfc/scannow' command is always called the SFC command, which is short for System File Checker. This command will process to check all the errors of the protected system files. If errors found, it will replace the corrupted system files with a cached copy. Here is how to run the SFC command:
On Windows XP and Windows 7
Step 1. Go to the search function from the bottom-left of the Windows taskbar and type cmd, it will then show you the Command Prompt. Right-click on it and select Run as administrator.
Step 2. Type sfc /scannow and hit Enter. If corrupted files are present, Windows should locate and repair them.
On Windows 8 and Windows 10
Step 1. Try running the command described in the Windows XP and Windows 7 section. If there are no issues, close the command prompt. If there are issues, proceed to step 2 below.
Step 2. On the command prompt, type DISM /Online /Cleanup-Image /RestoreHealth and hit Enter. Wait and then restart your PC.
#Fix 6. Run Check Disk Command (CHKDSK)
The Check Disk command is an advanced built-in error checker of Windows. You can perform a check on a drive, directory, or a specific file and fix the error automatically using this command. Note that there are possibilities you will lose some of the data since it will automatically fix the errors. To run the check disk command,
Step 1. Open the search box and type cmd. Zadig usb driver download. Right-click on the command prompt and choose Run as administrator.
Step 2. On the command prompt, type chkdsk [the path of the corrupted file] /f /r /x and hit Enter. The /f stands for fixing errors on the disk. Windows 10 f5 refresh. The /r stands for bad sectors locates as well as recovering readable information. The /x forces the volume to dismount if necessary.
If the disk you run the command cannot be locked, then you cannot perform the check disk right away. It will ask if you would like to check the drive next time you start the computer, type Yes, and hit Enter. Then restart your computer and it will run the command itself. This will help fix all errors in the corrupted files.
#Fix 7. Use an Online File Repair Tool
There are now many online tools that can solve user problems. You can try a file repair tool to see if it can fix your corrupted file. However, using an online tool is always tricky since it might steal your personal information. And the success rate will be regardlessly low. So think twice before you upload the file to the site.
#Fix 8. Repair the Corrupted File with a Data Recovery Software
I know you might wonder how does data recovery software can fix the corrupted file. The principle of data recovery tools is to find out all the data from a directory and pull them out to a new directory. In other words, the data recovery tool recovers all the data in the file (including the corrupted data), and then create a new one to put all the data it found, so that you will be able to get back and properly open & edit the file without any loss of the data.
You can use this tool - AnyRecover to fix the corrupted file, as well as the corrupted folder and hard drive. It provides a free trial for 3 files so you can get the corrupted file repaired without paying. It runs on your computer and doesn't collect any of the user's data so no worries about personal privacy. It's tech-free, user-friendly, and totally easy to use. The corrupted file will be fixed easily as one, two, three.
Step 1: Download and launch AnyRecover on your PC, from the list of file locations, select one of them in which your corrupted files located. You can also choose the specific folder with the file using the Specify a location from the bottom.
Step 2: Click on Scan to proceed. The program will start an all-round scan on your selected location. All the existing files as well as deleted ones will be shown on the screen.
Software To Fix Corrupted Files
Step 3. You can always click to Pause or Stop if the corrupted file is found out, or just wait for the scan to finish. Click on the files to preview them. Then choose the corrupted files you wish to get back and click Recover.
Note: Avoid storing the recovered files in the same location as the original one, to avoid data overwriting.
FAQ. Why Would Files Become Corrupted?
Repair Corrupted Files Online
This method is available to fix most Microsoft files corrupted problem. This is the easiest way but only works if you get a message like this:
Word/Excel/PowerPoint found unreadable content in [filename]. Do you want to recover the contents of this document? If you trust the source of this content, click Yes.
We found a problem with some content in [filename]. Do you want us to recover as much as we can? If you trust the source of this workbook, click Yes.
In this situation, just click 'Yes'. 90% of the time microsoft can recover the corrupted file and you will see it the same as you opened it last time.
#Fix 2. Restore the Corrupted File from Previous Versions
This method is also conditional. You have to had the previous versions feature turned on before. It will allow you to restore the file to the restore points. However, all the changes from that time will be gone. Damaged folders and hard drives can also be restored in the same way. To restore the file to previous versions,
Step 1.Right-click the corrupted file and choose Restore previous versions from the drop-down menu.
Step 2. Just select the version of the file you want to restore from the pop-up window. Either clicking Copy or Restore will work. I suggest you click on Copy and paste it somewhere else.
#Fix 3. Change the File Format
Sometimes the file shows corrupted because of a wrong file format. If you just get the file from your client or friend, it might be corrupted during the transfer due to compatibility issues. If the file has always been on your computer and it just gets corrupted for no reason, somehow the problem can also repair that. There is no risk to try.
Microsoft Downloads Fix Corrupted Files
Step 1.Make a copy of this corrupted file since changing the file format might cause damage to it.
Step 2. Change the file to a similar file format (eg. xlxs to xls) either by renaming the file or using an online file converter. If your file doesn't have a file format show after the file name, manually add the file extension (such as .xlsx) to it.
Step 3. See if the file can be opened properly.
#Fix 4. Perform a Check on the Driver with the Corrupted File
Windows itself offers the Error Check function. It will check the drive for file system errors. If the corrupted file is a system file, it can scan, find out, and fix the error. Here is how to perform a standard error check on the drive:
Step 1. Open the Computer and then right-click on the hard drive that has the corrupted files. Select Properties.
Step 2. On the Properties window, click Tools and then tap Check now under Error-checking.
Step 3. Select the 'Scan for and attempt recovery of bad sectors' and 'Automatically fix file system errors' checkboxes and then tap Start.
Step 4. If it is the system disk (normally C:) that contains the corrupted file, you have to schedule a disk check and restart your computer. The checking starts immediately when you restart the computer. After it is completed, the results will be displayed.
Step 5. After reviewing the scan result, tap Scan and repair drive. Select when you want the file system to be repaired and then wait for the final result.
#Fix 5. Run 'sfc/scannow' Command
This is also a solution to fix the system files corruption. The 'sfc/scannow' command is always called the SFC command, which is short for System File Checker. This command will process to check all the errors of the protected system files. If errors found, it will replace the corrupted system files with a cached copy. Here is how to run the SFC command:
On Windows XP and Windows 7
Step 1. Go to the search function from the bottom-left of the Windows taskbar and type cmd, it will then show you the Command Prompt. Right-click on it and select Run as administrator.
Step 2. Type sfc /scannow and hit Enter. If corrupted files are present, Windows should locate and repair them.
On Windows 8 and Windows 10
Step 1. Try running the command described in the Windows XP and Windows 7 section. If there are no issues, close the command prompt. If there are issues, proceed to step 2 below.
Step 2. On the command prompt, type DISM /Online /Cleanup-Image /RestoreHealth and hit Enter. Wait and then restart your PC.
#Fix 6. Run Check Disk Command (CHKDSK)
The Check Disk command is an advanced built-in error checker of Windows. You can perform a check on a drive, directory, or a specific file and fix the error automatically using this command. Note that there are possibilities you will lose some of the data since it will automatically fix the errors. To run the check disk command,
Step 1. Open the search box and type cmd. Zadig usb driver download. Right-click on the command prompt and choose Run as administrator.
Step 2. On the command prompt, type chkdsk [the path of the corrupted file] /f /r /x and hit Enter. The /f stands for fixing errors on the disk. Windows 10 f5 refresh. The /r stands for bad sectors locates as well as recovering readable information. The /x forces the volume to dismount if necessary.
If the disk you run the command cannot be locked, then you cannot perform the check disk right away. It will ask if you would like to check the drive next time you start the computer, type Yes, and hit Enter. Then restart your computer and it will run the command itself. This will help fix all errors in the corrupted files.
#Fix 7. Use an Online File Repair Tool
There are now many online tools that can solve user problems. You can try a file repair tool to see if it can fix your corrupted file. However, using an online tool is always tricky since it might steal your personal information. And the success rate will be regardlessly low. So think twice before you upload the file to the site.
#Fix 8. Repair the Corrupted File with a Data Recovery Software
I know you might wonder how does data recovery software can fix the corrupted file. The principle of data recovery tools is to find out all the data from a directory and pull them out to a new directory. In other words, the data recovery tool recovers all the data in the file (including the corrupted data), and then create a new one to put all the data it found, so that you will be able to get back and properly open & edit the file without any loss of the data.
You can use this tool - AnyRecover to fix the corrupted file, as well as the corrupted folder and hard drive. It provides a free trial for 3 files so you can get the corrupted file repaired without paying. It runs on your computer and doesn't collect any of the user's data so no worries about personal privacy. It's tech-free, user-friendly, and totally easy to use. The corrupted file will be fixed easily as one, two, three.
Step 1: Download and launch AnyRecover on your PC, from the list of file locations, select one of them in which your corrupted files located. You can also choose the specific folder with the file using the Specify a location from the bottom.
Step 2: Click on Scan to proceed. The program will start an all-round scan on your selected location. All the existing files as well as deleted ones will be shown on the screen.
Software To Fix Corrupted Files
Step 3. You can always click to Pause or Stop if the corrupted file is found out, or just wait for the scan to finish. Click on the files to preview them. Then choose the corrupted files you wish to get back and click Recover.
Note: Avoid storing the recovered files in the same location as the original one, to avoid data overwriting.
FAQ. Why Would Files Become Corrupted?
Repair Corrupted Files Online
There are various reasons why files become corrupted. These include:
If there is a power outage or your computer crashes while you are saving your files.
If the hard drive or the storage device has some bad sectors.
The presence of malware and viruses on your storage device.
A Bad update or an unexpected computer shutdown.
